Wholesale Dealers of SGS Certificated Sterilizing Grade Filter Cartridge with Pleated PTFE Membrane for Air Sterile Electronic Pharmaceutical Chemical Filtration 0.05 Micron 10″
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Wholesale Dealers of SGS Certificated Sterilizing Grade Filter Cartridge with Pleated PTFE Membrane for Air Sterile Electronic Pharmaceutical Chemical Filtration 0.05 Micron 10″-40″, Be sure to experience free to make contact with us at any time. We’re going to reply you when we receive your inquiries. Please note that samples are available before we start our business.
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for High quality PTFE air filtration filter, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you the most competitive price in the market
◆Naturally hydrophobic PTFE membrane with excellent porosity, high low rate
◆Absolute rating, filtration efficiency ≥99.99%, Up to 0.01 micron in gas sterile
◆Low pressure drop and long service life
◆Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
◆High temperature endurance performance
◆100% integrity tested before final assembly
◆Replace Sartorius ,Pall or Millipore Filter is available
•Compressed air, CO2 line sterile filtration;
•Tank vent, Fermentation air,
•Air filtration in aseptic packaging.
•Aggressive acids, Bases, Solvents;
•Photoresists, Etch Solutions;
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) | |||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | IPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| 045-0.45um | BN-222/FIN | 30-30″ | V-viton | |||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Wholesale Dealers of SGS Certificated Sterilizing Grade Filter Cartridge with Pleated PTFE Membrane for Air Sterile Electronic Pharmaceutical Chemical Filtration 0.05 Micron 10″-40″, Be sure to experience free to make contact with us at any time. We’re going to reply you when we receive your inquiries. Please note that samples are available before we start our business.
High quality PTFE air filtration filter, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you the most competitive price in the market