Short Lead Time for 100% Integrity Tested Hydrophobic PTFE Pleated Filter Cartridges Air Compressor Water Filter for Compressed Air
We now have many fantastic staff members customers superior at advertising, QC, and working with varieties of troublesome problem within the generation system for Short Lead Time for 100% Integrity Tested Hydrophobic PTFE Pleated Filter Cartridges Air Compressor Water Filter for Compressed Air, As a leading manufacture and exporter, we enjoy a good reputation in the international markets, especially in America and Europe, because of our top quality and reasonable prices.
We now have many fantastic staff members customers superior at advertising, QC, and working with varieties of troublesome problem within the generation system for OEM PTFE membrane pleated filter cartridge 10″ 20″ 30″ 40″, Our company always concentrate on the development of the international market. We have now a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
◆Naturally hydrophobic PTFE membrane with excellent porosity, high low rate
◆Absolute rating, filtration efficiency ≥99.99%, Up to 0.01 micron in gas sterile
◆Low pressure drop and long service life
◆Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
◆High temperature endurance performance
◆100% integrity tested before final assembly
◆Replace Sartorius ,Pall or Millipore Filter is available
•Compressed air, CO2 line sterile filtration;
•Tank vent, Fermentation air,
•Air filtration in aseptic packaging.
•Aggressive acids, Bases, Solvents;
•Photoresists, Etch Solutions;
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | IPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| 045-0.45um | BN-222/FIN | 30-30″ | V-viton | |||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
We now have many fantastic staff members customers superior at advertising, QC, and working with varieties of troublesome problem within the generation system for Short Lead Time for 100% Integrity Tested Hydrophobic PTFE Pleated Filter Cartridges Air Compressor Water Filter for Compressed Air, As a leading manufacture and exporter, we enjoy a good reputation in the international markets, especially in America and Europe, because of our top quality and reasonable prices.
OEM PTFE membrane pleated filter cartridge 10″ 20″ 30″ 40″, Our company always concentrate on the development of the international market. We have now a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
