Quality Inspection for Stainless Steel Water Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan
Quality Inspection for Stainless Steel Water Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan Detail:
◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)
• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Melt Blown Polypropylene | ||||
| Micron Rating: | 1.0, 5.0, 10.0, 20, 50, 70, 100um | |||||
| Inner core: | Polypropylene or Coreless | |||||
| O-rings/gaskets(Only for 226, 222 Ends): | Silicone, Nitrile, EPDM, Viton, etc | |||||
| Filtration Efficiency | ≥80% | |||||
| Cartridge Dimensions | Outer Diameter | 63mm (2.5″) / 114mm (4.5″) | ||||
| Inner Diameter | 28mm (1.10″) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.4 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 50℃ (122℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.0 bar (58psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.0 bar (29psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Not recommended | |||||
| PRODUCT | MICRON | Outer DIA. | ADAPTER | LENGTH | O-RING / GASKET | |
| CP | 100-1um | D63-63mm(2.5″) | AA- CUT ENDS (NIL) | 10-10″ | S-silicone; N-nitrile | |
| 500-5um | D114-114mm(4.5″) | BN-222/ FIN | 20-20″ | E-epdm ; V- viton | ||
| 1000-10um | CN-226/ FIN | 30-30″ | ||||
| 2000-20um | 40-40″ | How to Order?- Example | ||||
| Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″ | |||||
| Selection Code is: CP100D63AA10 | ||||||
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Quality Inspection for Stainless Steel Water Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: India, Azerbaijan, Yemen, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
By Anne from Paraguay - 2017.12.31 14:53
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Cara from Japan - 2018.10.09 19:07
Write your message here and send it to us
