Popular Design for 3m High Flow Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan
Popular Design for 3m High Flow Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan Detail:
◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)
• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Melt Blown Polypropylene | ||||
| Micron Rating: | 1.0, 5.0, 10.0, 20, 50, 70, 100um | |||||
| Inner core: | Polypropylene or Coreless | |||||
| O-rings/gaskets(Only for 226, 222 Ends): | Silicone, Nitrile, EPDM, Viton, etc | |||||
| Filtration Efficiency | ≥80% | |||||
| Cartridge Dimensions | Outer Diameter | 63mm (2.5″) / 114mm (4.5″) | ||||
| Inner Diameter | 28mm (1.10″) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.4 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 50℃ (122℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.0 bar (58psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.0 bar (29psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Not recommended | |||||
| PRODUCT | MICRON | Outer DIA. | ADAPTER | LENGTH | O-RING / GASKET | |
| CP | 100-1um | D63-63mm(2.5″) | AA- CUT ENDS (NIL) | 10-10″ | S-silicone; N-nitrile | |
| 500-5um | D114-114mm(4.5″) | BN-222/ FIN | 20-20″ | E-epdm ; V- viton | ||
| 1000-10um | CN-226/ FIN | 30-30″ | ||||
| 2000-20um | 40-40″ | How to Order?- Example | ||||
| Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″ | |||||
| Selection Code is: CP100D63AA10 | ||||||
Product detail pictures:
Related Product Guide:
Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Popular Design for 3m High Flow Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: South Africa, Thailand, Norwegian, We have the best products and professional sales and technical team.With the development of our company, we are able to provide customers best products, good technical support, perfect after-sales service.
By Sabrina from Las Vegas - 2017.07.07 13:00
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Miguel from Johor - 2017.07.07 13:00
Write your message here and send it to us
