OEM/ODM Manufacturer China TS Hydrophilic PTFE Membrane Pleated Filter Cartridge for Remove The Particles
The corporate upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will keep on to serve outdated and new clients from home and abroad whole-heatedly for OEM/ODM Manufacturer China TS Hydrophilic PTFE Membrane Pleated Filter Cartridge for Remove The Particles, We’re on the lookout ahead to building positive and effective links while using the providers around the environment. We warmly welcome you to definitely get hold of us to begin discussions on how we will bring this into being.
The corporate upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will keep on to serve outdated and new clients from home and abroad whole-heatedly for Chinese TS Hydrophilic PTFE Pleated Cartridge, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
◆Hydrophilic PTFE membrane suit for liquid sterile filtration, no prewetting
◆High filtration efficiency, ≥99.99%, long service life
◆Uniform pore-size distribution allow high low rate
◆Superior chemical compatibility, ideal for strong alkali and acids, resistant to high temperature, ozone
◆Low extractable levels, no fiber releasing
◆Replace Sartorius ,Pall or Millipore Filter is available
•Mineral water, purified water, ozone, strong oxidizing liquid filtration
•High temperature liquids filtration
•Strong alkali, acids, corrosive liquids filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65,1.0, 3.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H - Chemical | IHPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| P - Phamar | 045-0.45um | BN-222/FIN | 30-30″ | V-viton | ||
| F - Food | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIHPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
The corporate upholds the philosophy of “Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth”, will keep on to serve outdated and new clients from home and abroad whole-heatedly for OEM/ODM Manufacturer China TS Hydrophilic PTFE Membrane Pleated Filter Cartridge for Remove The Particles, We’re on the lookout ahead to building positive and effective links while using the providers around the environment. We warmly welcome you to definitely get hold of us to begin discussions on how we will bring this into being.
Chinese TS Hydrophilic PTFE Pleated Cartridge, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
