New Delivery for High Flow Pp Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan
New Delivery for High Flow Pp Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan Detail:
◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)
• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Melt Blown Polypropylene | ||||
| Micron Rating: | 1.0, 5.0, 10.0, 20, 50, 70, 100um | |||||
| Inner core: | Polypropylene or Coreless | |||||
| O-rings/gaskets(Only for 226, 222 Ends): | Silicone, Nitrile, EPDM, Viton, etc | |||||
| Filtration Efficiency | ≥80% | |||||
| Cartridge Dimensions | Outer Diameter | 63mm (2.5″) / 114mm (4.5″) | ||||
| Inner Diameter | 28mm (1.10″) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.4 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 50℃ (122℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.0 bar (58psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.0 bar (29psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Not recommended | |||||
| PRODUCT | MICRON | Outer DIA. | ADAPTER | LENGTH | O-RING / GASKET | |
| CP | 100-1um | D63-63mm(2.5″) | AA- CUT ENDS (NIL) | 10-10″ | S-silicone; N-nitrile | |
| 500-5um | D114-114mm(4.5″) | BN-222/ FIN | 20-20″ | E-epdm ; V- viton | ||
| 1000-10um | CN-226/ FIN | 30-30″ | ||||
| 2000-20um | 40-40″ | How to Order?- Example | ||||
| Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″ | |||||
| Selection Code is: CP100D63AA10 | ||||||
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of New Delivery for High Flow Pp Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Luxembourg, South Korea, Hungary, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Erin from Miami - 2017.06.29 18:55
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Lee from Slovakia - 2017.09.09 10:18
Write your message here and send it to us
