Manufacturer of 0.2 Micron Filter Capsule
Manufacturer of 0.2 Micron Filter Capsule - Small Volume Disposable Capsule Filter – TianshanDetail:
◆ Capsule filters are kind of self contained,ready to use,disposable filters
◆ Made up of polypropylene cage and pleated membrane filter inside by the rmal bonding,free of adhesives,binders and other chemicals
◆ Available with a wide range of connectors and filter medias for options to meet various filtration requirements
◆ Ideal for small batch prefiltration and final filtration of liquids or gas in laboratory
◆ Fully integrity tested before release from manufacture
• Digital inks, paintings
• Small injection and tissue cultures in pharmaceutical industry
• Corrosive liquids/solvents filtration in chemical industry
• Photoresist, acids, etc in electronic industry
• Gas/Air sterile filtration
• Laboratory solutions
| Table : Filter Media and Pore Size available | ||
| Filter Media | TS CODE | Pore Size(um) |
| PES | IPS | 0.10, 0.20, 0.45, 0.65 µm |
| PP | DPP | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 µm |
| PTFE | IPF | 0.10, 0.20, 0.45, 1.00 µm |
| NYLON66 | PNN | 0.10, 0.20, 0.45, 0.65, 1.00 µm |
| PVDF (Hydrophilic) | DHPV | 0.10, 0.20, 0.45, 1.00 µm |
| Materials Of Construction | Filter Media: | PP/PES/PVDF/PTFE/Nylon Membranes for Options | ||||
| Support Layers: | Polypropylene | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Cartridge Dimensions | Outer Diameter | 69mm/60mm | ||||
| Length | Nominal 2.5″, 5″ | |||||
| Connectors: | 1/4″MNPT; 1/2″MNPT; 9/16″ hose barb; 1 1/2″ Sanitary Flange; 1/4″compression joint and so on | |||||
| Filtration Area(m2) | 0.05 m2 to 0.44 m2 | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| Sterilization: | Autoclave sterilization 30 minutes, Gamma-irradiation | |||||
| TYPE | FILTER MEDIA | MICRON | CONNECTIONS | LENGTH | Selection Code-Example | |
| K68 – Φ68 | IPS – Polyethersulfone | 0.1um-010 | A- 1 1/2″ Sanitary Flange | 2 - 2.5″ | Diameter: Φ68 | |
| K60 – Φ60 | IPP – Polypropylene | 0.2um-020 | B-1/4″MNPT | 5- 5″ | Filter Media: Polypropylene | |
| IPF – Polytetrafluoroethylene | 0.45um-045 | C-1/2″MNPT | Micron: 0.1um | |||
| PNN – Nylon | 0.65um-065 | D- 9/16″ Hose barb | Connection:1/4″MNPT | |||
| DHPV – PolyvinylideneFluoride | 1um-100 | E- 1/4″compression joint | Length: 2.5″ | |||
| CNCA | 5um-500 | F- 1/4″compression bent | ||||
| 10um-1000 | X -Others | Selection Code is: K68IPP010B2 | ||||
| 50um-5000 | ||||||
Name: K68-4N-M10 2.5″
Inlet & outlet: 1/2″NPT
Filtration area: 1200cm²
Name: K68-4N-M10 5″
Inlet & outlet: 1/2″NPT
Filtration area: 2000cm²
Name: K68-2N-M10 2.5″
Inlet & outlet: 1/4″NPT
Filtration area: 1200cm²
Name: K68-2N-M10 5″
Inlet & outlet: 1/4″NPT
Filtration area: 2000cm²
Name: K68-4H-M10 2.5″
Inlet & outlet: 9/16″ hose barb
Filtration area: 1200cm²
Name: K68-4H-M10 5″
Inlet & outlet: 9/16″hose barb
Filtration area: 2000cm²
Name: K60-2CE-LF
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K60-2CE-NA
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K60-2C-M10
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K68-2N-M10 2.5″
Inlet & outlet: 1/4″NPT connector
Filtration area: 1200cm²
Name: K68B-4H-M10 2.5″
Inlet & outlet: 1/2″hose barb
Filtration area: 1200cm²
Name: K68C-MT-1H 2.5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-MT-1H 5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 2200cm²
Name: K68C-TC-1H 2.5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K85-2C-NA
Inlet & outlet: 1/4″compression joint:
Filtration area: 500cm²
Product detail pictures:
Related Product Guide:
We follow our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create much more worth for our buyers with our abundant resources, highly developed machinery, experienced workers and great providers forManufacturer of 0.2 Micron Filter Capsule - Small Volume Disposable Capsule Filter – Tianshan, The product will supply to all over the world, such as: Austria, Sydney, South Korea, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.