Manufactur standard Metal Filter Cartridge - Stainless Steel Pleated & Powder Sintered Filter – Tianshan
Manufactur standard Metal Filter Cartridge - Stainless Steel Pleated & Powder Sintered Filter – Tianshan Detail:
◆Extremely robust construction, high mechanical strength
◆Ideal for aggressive solvents, viscous and hot solutions
◆Backwashable and cleaned by chemical solvent, hot water, steam, long service life
◆Pleated Cartridge provides higher filtration area
◆Removal rating from 5 to 100 microns
• Steam filtration;
• Prefiltration and decarbonization of high viscosity liquid filtration;
• Removing impuriteis ofliquids in Petrochemical industry;
• Agressive solvents filtration;
• Highly corrosive liquid and gas purification;
• Liquids or gases filtration in high temperature and pressure;
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | SUS316L Mesh Pleated | ||||
| Micron Rating: | 0.45-100 um | |||||
| Porosity: | 60%-65% | |||||
| O-rings/gaskets(only for 222, 226, DOE ends): | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Filtratioin Efficiency: | 95%-99% | |||||
| Cartridge Dimensions | Outer Diameter | 60mm/80mm | ||||
| Length(based on Cut Ends) | 10″- 250mm, 20″- 500mm, 30″-750mm, 40″- 1000mm | |||||
| Operating conditions | Max.Operating Temperature.: | 300℃ (572℉) | ||||
| Max. Differential Pressure: | 6.0 bar | |||||
| PH Value compatibility: | 1-14 | |||||
| Materials Of Construction | Filter Media: | SUS316L Powder Sintered | ||||
| Micron Rating: | 1.0, 3.0, 5.0, 10um | |||||
| Porosity: | 35%-45% | |||||
| O-rings/gaskets(only for 222, 226, DOE ends): | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Filtratioin Efficiency: | 95%-99% | |||||
| Cartridge Dimensions | Outer Diameter | 60mm/80mm | ||||
| Length(based on Cut Ends) | 10″- 250mm, 20″- 500mm, 30″-750mm, 40″- 1000mm | |||||
| Operating conditions | Max.Operating Temperature.: | 300℃ (572℉) | ||||
| Max. Differential Pressure: | 6.0 bar | |||||
| PH Value compatibility: | 1-14 | |||||
| PRODUCT | MICRON | Outer Dia. | ADAPTER | LENGTH | O-RING / GASKET | |
| STS | 100-1um | D60-60mm | NIL- Cut Ends (Cylinder) | 10-10″ | S-silicone; N-nitrile | |
| STP | 300-3um | D80-80mm | AA- DOE ( With Gaskets) | 20-20″ | E-epdm ; T-teflon (Encaptulated) | |
| 500-5um | BF-222/ Seal | 30-30″ | V-vition | |||
| 1000-10um | CF-226/ Seal | 40-40″ | How to Order?- Example | |||
| 2000-20um | YBP- 1″ BSP Threaded | 05-5″ | STP; Micron:5um; Outer Dia.:60mm; Length:10″; Adapter:1″BSP; O-rings: Silicone Selection Code is: STP500D60YBP10S |
|||
| HBP- 1/2″ BSP Threaded | Other-XX | |||||
| Selection Code is: PSS100D63AA10P | ||||||
Product detail pictures:
Related Product Guide:
"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Manufactur standard Metal Filter Cartridge - Stainless Steel Pleated & Powder Sintered Filter – Tianshan , The product will supply to all over the world, such as: Portugal, Munich, Burundi, Our items have national accreditation requirements for qualified, high quality goods, affordable value, was welcomed by people today all over the world. Our products will continue to enhance within the order and look forward to cooperation with you, Should really any of these products and solutions be of curiosity to you, be sure to letus know. We are likely to be content to offer you a quotation up on receipt of your detailed needs.
By Federico Michael Di Marco from Ecuador - 2017.08.16 13:39
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Martin Tesch from Jordan - 2018.05.15 10:52
Write your message here and send it to us
