Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Polyethersulfone (PES) membrane Pleated Filter Cartridge – Tianshan
Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Polyethersulfone (PES) membrane Pleated Filter Cartridge – Tianshan Detail:
◆Absolute rate inherently hydrophilic PES membrane filter for sterile filtration
◆Highly asymmetric PES membrane provides high dirt holding capacity and longer service life
◆Extremely high low rate and low pressure drop
◆Low protein binding and wide chemical compatibility
◆Excellent resistance to hydrolysis allows use in Ultra Pure Water(UPW)system
◆Replace Sartorius ,Pall or Millipore Filter is available
•Sterile filtration for water, mineral water, wine, beer and other beverages
•Ultrapure water and disk, display, multi silicon process water in electronics
•Fine chemicals, water process;
•API,LPV,blood serum, biologicals, buffers and other pharmaceuticals
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Asymmetric PES Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.04, 0.1, 0.2, 0.45, 0.65, 0.85, 1.2 um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 85℃ (185℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 2-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:8 hours; |
|||||
| Cartridge Safety | Endotoxin: | <0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H - Chemical | IPS | 004-0.04um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 010-0.1um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| P - Phamar | 020-0.2um | BN-222/FIN | 30-30″ | V-viton | ||
| F - Food | 045-0.45um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||
| 065-0.65um | CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPS045AA10S | |||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
To create much more benefit for consumers is our company philosophy; customer growing is our working chase for Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Polyethersulfone (PES) membrane Pleated Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Iran, Argentina, Turkey, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
Write your message here and send it to us




