Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Nylon membrane Pleated Filter Cartridge – Tianshan
Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Nylon membrane Pleated Filter Cartridge – Tianshan Detail:
◆Naturally hydrophilic Nylon 6,6 membrane for sterile filtration, absolute rating ≥99.99%
◆Chemical resistant to alkaline solutions and organic solvents, suitable for sterile filtration of those liquids
◆High low rate and cost-effective High non-specific adsorption and low extractables
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Wine, beer, mineral water, pure water filtration;
•Solvents sterile filtration for analytical determination such as HPLC;
•Fine chemicals, especially ketone, ester, ether,
•Ultrapure water and disk, display, multi silicon process water in Electronics;
•Digital inks
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic Nylon6,6 Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 6-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉), cumulative Time: 3hours, autoclave 30 minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | <0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P - Pharmaceutical | PNN | 010-0.1μm | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2μm | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| F - Food&Beverage | 045-0.45μm | BN-222/FIN | 30-30″ | V-viton | ||
| 100-1.00μm | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PPNN045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of Low MOQ for 5 Micron Stainless Steel Filter Cartridge - Nylon membrane Pleated Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Slovakia, South Korea, Iran, we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
Write your message here and send it to us





