Leading Manufacturer for Compressed Air Filter - High Flow Melt Blown Filter Cartridge – Tianshan
Leading Manufacturer for Compressed Air Filter - High Flow Melt Blown Filter Cartridge – Tianshan Detail:
◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)
• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Melt Blown Polypropylene | ||||
| Micron Rating: | 1.0, 5.0, 10.0, 20, 50, 70, 100um | |||||
| Inner core: | Polypropylene or Coreless | |||||
| O-rings/gaskets(Only for 226, 222 Ends): | Silicone, Nitrile, EPDM, Viton, etc | |||||
| Filtration Efficiency | ≥80% | |||||
| Cartridge Dimensions | Outer Diameter | 63mm (2.5″) / 114mm (4.5″) | ||||
| Inner Diameter | 28mm (1.10″) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.4 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 50℃ (122℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.0 bar (58psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.0 bar (29psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Not recommended | |||||
| PRODUCT | MICRON | Outer DIA. | ADAPTER | LENGTH | O-RING / GASKET | |
| CP | 100-1um | D63-63mm(2.5″) | AA- CUT ENDS (NIL) | 10-10″ | S-silicone; N-nitrile | |
| 500-5um | D114-114mm(4.5″) | BN-222/ FIN | 20-20″ | E-epdm ; V- viton | ||
| 1000-10um | CN-226/ FIN | 30-30″ | ||||
| 2000-20um | 40-40″ | How to Order?- Example | ||||
| Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″ | |||||
| Selection Code is: CP100D63AA10 | ||||||
Product detail pictures:
Related Product Guide:
Our rewards are lower costs,dynamic profits team,specialised QC,potent factories,high-quality services for Leading Manufacturer for Compressed Air Filter - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Gambia, Southampton, Bangladesh, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Stephen from India - 2018.02.21 12:14
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Christina from Bandung - 2017.09.28 18:29
Write your message here and send it to us
