High-Quality Cold Air Intake Filter Housing: Ensuring Optimal Performance and Air Flow | TS Filter
When it comes to optimizing your vehicle's performance and improving its overall efficiency, having a high-quality cold air intake filter housing is essential. At TS Filter, we understand the importance of clean and unrestricted air flow for maximum engine power and fuel efficiency. Our exceptional cold air intake filter housing is specifically designed to ensure optimal performance and protect your engine from harmful contaminants.
Crafted with precision and using advanced filtration technology, our cold air intake filter housing offers superior protection against dirt, dust, and debris. Engineered to last, our housing is made from robust materials that can withstand the most demanding environments, providing long-lasting durability and reliability. Say goodbye to engine wear caused by impurities and enjoy improved engine life and performance with our premium-grade filter housing.
Previous:Nylon membrane Pleated Filter Cartridge Next:Hydrophilic PTFE Filter Cartridge
Not only does our cold air intake filter housing enhance air flow, but it also reduces air turbulence, resulting in smoother and more efficient combustion. This means improved acceleration, better throttle response, and increased overall horsepower. Our housing's design ensures a perfect fit and seamless integration into your vehicle's cold air intake system, allowing for hassle-free installation and maintenance. Investing in our cold air intake filter housing is an investment in your vehicle's performance and longevity. Experience the difference that clean and unrestricted air flow can make. Upgrade your cold air intake system with TS Filter's top-of-the-line cold air intake filter housing and take your driving experience to the next level. Note: The content provided above is a sample and should be tailored according to your specific requirements and preferences.
◆Naturally hydrophobic PTFE membrane with excellent porosity, high low rate
◆Absolute rating, filtration efficiency ≥99.99%, Up to 0.01 micron in gas sterile
◆Low pressure drop and long service life
◆Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
◆High temperature endurance performance
◆100% integrity tested before final assembly
◆Replace Sartorius ,Pall or Millipore Filter is available
•Compressed air, CO2 line sterile filtration;
•Tank vent, Fermentation air,
•Air filtration in aseptic packaging.
•Aggressive acids, Bases, Solvents;
•Photoresists, Etch Solutions;
Table : Typical water flow rate (10")
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75'') | ||||
| Inner Diameter | 33mm(1.30'') | |||||
| Length(based on DOE end caps) | 10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10'' | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) | |||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10" | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | IPF | 010-0.1um | AA- DOE | 10-10" | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 020-0.2um | CN-226/FIN | 20-20" | E-epdm ; T-teflon (encaptulated) | ||
| 045-0.45um | BN-222/FIN | 30-30" | V-viton | |||
| BF-222/ FLAT SEAL | 40-40" | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5" | Pharmaceutical grade; Micron:0.45um; Length:10" ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Not only does our cold air intake filter housing enhance air flow, but it also reduces air turbulence, resulting in smoother and more efficient combustion. This means improved acceleration, better throttle response, and increased overall horsepower. Our housing's design ensures a perfect fit and seamless integration into your vehicle's cold air intake system, allowing for hassle-free installation and maintenance. Investing in our cold air intake filter housing is an investment in your vehicle's performance and longevity. Experience the difference that clean and unrestricted air flow can make. Upgrade your cold air intake system with TS Filter's top-of-the-line cold air intake filter housing and take your driving experience to the next level. Note: The content provided above is a sample and should be tailored according to your specific requirements and preferences.