Factory source Filter Capsule 0.65 - Small Volume Disposable Capsule Filter – Tianshan
Factory source Filter Capsule 0.65 - Small Volume Disposable Capsule Filter – Tianshan Detail:
◆ Capsule filters are kind of self contained,ready to use,disposable filters
◆ Made up of polypropylene cage and pleated membrane filter inside by the rmal bonding,free of adhesives,binders and other chemicals
◆ Available with a wide range of connectors and filter medias for options to meet various filtration requirements
◆ Ideal for small batch prefiltration and final filtration of liquids or gas in laboratory
◆ Fully integrity tested before release from manufacture
• Digital inks, paintings
• Small injection and tissue cultures in pharmaceutical industry
• Corrosive liquids/solvents filtration in chemical industry
• Photoresist, acids, etc in electronic industry
• Gas/Air sterile filtration
• Laboratory solutions
| Table : Filter Media and Pore Size available | ||
| Filter Media | TS CODE | Pore Size(um) |
| PES | IPS | 0.10, 0.20, 0.45, 0.65 µm |
| PP | DPP | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 µm |
| PTFE | IPF | 0.10, 0.20, 0.45, 1.00 µm |
| NYLON66 | PNN | 0.10, 0.20, 0.45, 0.65, 1.00 µm |
| PVDF (Hydrophilic) | DHPV | 0.10, 0.20, 0.45, 1.00 µm |
| Materials Of Construction | Filter Media: | PP/PES/PVDF/PTFE/Nylon Membranes for Options | ||||
| Support Layers: | Polypropylene | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Cartridge Dimensions | Outer Diameter | 69mm/60mm | ||||
| Length | Nominal 2.5″, 5″ | |||||
| Connectors: | 1/4″MNPT; 1/2″MNPT; 9/16″ hose barb; 1 1/2″ Sanitary Flange; 1/4″compression joint and so on | |||||
| Filtration Area(m2) | 0.05 m2 to 0.44 m2 | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| Sterilization: | Autoclave sterilization 30 minutes, Gamma-irradiation |
|||||
| TYPE | FILTER MEDIA | MICRON | CONNECTIONS | LENGTH | Selection Code-Example | |
| K68 – Φ68 | IPS – Polyethersulfone | 0.1um-010 | A- 1 1/2″ Sanitary Flange | 2 - 2.5″ | Diameter: Φ68 | |
| K60 – Φ60 | IPP – Polypropylene | 0.2um-020 | B-1/4″MNPT | 5- 5″ | Filter Media: Polypropylene | |
| IPF – Polytetrafluoroethylene | 0.45um-045 | C-1/2″MNPT | Micron: 0.1um | |||
| PNN – Nylon | 0.65um-065 | D- 9/16″ Hose barb | Connection:1/4″MNPT | |||
| DHPV – PolyvinylideneFluoride | 1um-100 | E- 1/4″compression joint | Length: 2.5″ | |||
| CNCA | 5um-500 | F- 1/4″compression bent | ||||
| 10um-1000 | X -Others | Selection Code is: K68IPP010B2 | ||||
| 50um-5000 | ||||||
Name: K68-4N-M10 2.5″
Inlet & outlet: 1/2″NPT
Filtration area: 1200cm²
Name: K68-4N-M10 5″
Inlet & outlet: 1/2″NPT
Filtration area: 2000cm²
Name: K68-2N-M10 2.5″
Inlet & outlet: 1/4″NPT
Filtration area: 1200cm²
Name: K68-2N-M10 5″
Inlet & outlet: 1/4″NPT
Filtration area: 2000cm²
Name: K68-4H-M10 2.5″
Inlet & outlet: 9/16″ hose barb
Filtration area: 1200cm²
Name: K68-4H-M10 5″
Inlet & outlet: 9/16″hose barb
Filtration area: 2000cm²
Name: K60-2CE-LF
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K60-2CE-NA
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K60-2C-M10
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K68-2N-M10 2.5″
Inlet & outlet: 1/4″NPT connector
Filtration area: 1200cm²
Name: K68B-4H-M10 2.5″
Inlet & outlet: 1/2″hose barb
Filtration area: 1200cm²
Name: K68C-MT-1H 2.5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-MT-1H 5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 2200cm²
Name: K68C-TC-1H 2.5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K85-2C-NA
Inlet & outlet: 1/4″compression joint:
Filtration area: 500cm²
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Factory source Filter Capsule 0.65 - Small Volume Disposable Capsule Filter – Tianshan , The product will supply to all over the world, such as: New Zealand, Malaysia, Malawi, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !
By Ann from Mauritius - 2017.06.29 18:55
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
By Penny from Bulgaria - 2017.07.07 13:00
