Factory Promotional China Manufacturer of Cartridge Filter Disposable Micron PP Polypropylene Capsule Filter
Which has a positive and progressive attitude to customer’s fascination, our company repeatedly improves our products quality to meet the desires of consumers and further focuses on safety, reliability, environmental requirements, and innovation of Factory Promotional China Manufacturer of Cartridge Filter Disposable Micron PP Polypropylene Capsule Filter, Only for accomplish the good-quality products to fulfill customer’s demand, all of our merchandise have been strictly inspected before shipment.
Which has a positive and progressive attitude to customer’s fascination, our company repeatedly improves our products quality to meet the desires of consumers and further focuses on safety, reliability, environmental requirements, and innovation of China TS made customized capsule filter, Welcome to visit our company and factory, there are various merchandise displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to provide you the best service
◆ Capsule filters are kind of self contained,ready to use,disposable filters
◆ Made up of polypropylene cage and pleated membrane filter inside by the rmal bonding,free of adhesives,binders and other chemicals
◆ Available with a wide range of connectors and filter medias for options to meet various filtration requirements
◆ Ideal for small batch prefiltration and final filtration of liquids or gas in laboratory
◆ Fully integrity tested before release from manufacture
• Digital inks, paintings
• Small injection and tissue cultures in pharmaceutical industry
• Corrosive liquids/solvents filtration in chemical industry
• Photoresist, acids, etc in electronic industry
• Gas/Air sterile filtration
• Laboratory solutions
| Table : Filter Media and Pore Size available | ||
| Filter Media | TS CODE | Pore Size(um) |
| PES | IPS | 0.10, 0.20, 0.45, 0.65 µm |
| PP | DPP | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 µm |
| PTFE | IPF | 0.10, 0.20, 0.45, 1.00 µm |
| NYLON66 | PNN | 0.10, 0.20, 0.45, 0.65, 1.00 µm |
| PVDF (Hydrophilic) | DHPV | 0.10, 0.20, 0.45, 1.00 µm |
| Materials Of Construction | Filter Media: | PP/PES/PVDF/PTFE/Nylon and other Membranes for Options | ||||
| Support Layers: | Polypropylene | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Cartridge Dimensions | Outer Diameter | 69mm/60mm | ||||
| Length | Nominal 1.5″, 2.5″, 5″ 10″ | |||||
| Connectors: | MNPT; Hose barb; Sanitary Flange(Tri-Clamp); Compression joint and so on | |||||
| Filtration Area(m2) | 0.045 m2 to 0.44 m2 | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | 2.4 bar (34.8psi) at 25℃ (77℉). | |||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| Sterilization: | Autoclave sterilization 30 minutes, Gamma-irradiation (Need to confirm with Seller) | |||||
| TYPE | FILTER MEDIA | MICRON | CONNECTIONS | LENGTH | Vent/Drain | |
| K68B – Φ68 (Filtration Area 1200cm2 or 2200cm2 or 4400cm2 for option) | IPS – Polyethersulfone | 0.1um-010 | A- 1 1/2″ Tri-clamp (K68C type only) | 1- 1.5″ (K60 only) | M10 (K68B & K60) | |
| K60 – Φ60 (Filtraion Area 450cm2) | IPP – Polypropylene | 0.2um-020 | B-1/2″ Tri-clamp (K68C type only) | 2 - 2.5″ (K68B&K68C) | 1/8″ Hose Barb (K68C only) | |
| K68C- Φ68(Filtration Area:1200cm2 or 2200cm2 or 4400cm2 for option) | IPF – Polytetrafluoroethylene | 0.45um-045 | C-1/4″MNPT ( K68B&K60 only) | 5- 5″ (K68B&K68C) | ||
| PNN – Nylon | 0.65um-065 | D-1/2″MNPT ( K68B only) | 10- 10″ (K68B&K68C) | |||
| DHPV – PolyvinylideneFluoride | 1um-100 | E- 9/16″ Hose barb (K68B only) | ||||
| CNCA | 5um-500 | F- 1/4″compression joint (K60 only) | ||||
| 10um-1000 | G- 1/4″ Hose Barb (K68B&K60) | |||||
| 50um-5000 | H- 1/2″ Hose Barb (K68B only) | |||||
| X -Others ( If you need other connector pls make inquiry) | ||||||
| For Example: PES membrane, 0.2um, 2200cm2 filtration area, 1.5″ Tri-clamp —K68CIPS020A5 | ||||||
Name: K60-2C-M10
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K68B-4H-M10 2.5″
Inlet & outlet: 1/2″hose barb
Filtration area: 1200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K68B-2N-M10 2.5″
Inlet & outlet: 1/4″NPT connector
Filtration area: 1200cm²
Name: K68C-MT-1H 2.5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-TC-1H 2.5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 1200cm²Which has a positive and progressive attitude to customer’s fascination, our company repeatedly improves our products quality to meet the desires of consumers and further focuses on safety, reliability, environmental requirements, and innovation of Factory Promotional China Manufacturer of Cartridge Filter Disposable Micron PP Polypropylene Capsule Filter, Only for accomplish the good-quality products to fulfill customer’s demand, all of our merchandise have been strictly inspected before shipment.
Factory Promotional China TS made customized capsule filter, Welcome to visit our company and factory, there are various merchandise displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to provide you the best service