Factory Price TS Excellent Flow Rate Multi Layers PP Pleated Filter Cartridge
We emphasize progress and introduce new merchandise into the market each and every year for Factory Price TS Excellent Flow Rate Multi Layers PP Pleated Filter Cartridge, Be sure to experience free to make contact with us at any time. We’re going to reply you when we receive your inquiries. Please note that samples are available before we start our business.
We emphasize progress and introduce new merchandise into the market each and every year for TS Made Multi Micron PP Pleated Filter, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
◆ Multi layers fine polypropylene membrane offer superior dirt holding capacity
◆ High flow rate and excellent filtration efficiency
◆ Complete Polypropylene structure, wide chemical compatibility
◆ Suitable for the fluids which is high viscosity or contain high bio-burdens
◆ Replace Sartorius ,Pall or Millipore Filter is available
•High viscosity fluids, such as syrups;
•Wine, Beer, Juice and mineral water in beverge industry;
•Ink, Solvents, plating solutions;
•Prefiltration of R.O. system in electronics industy;
•Oral Liquids, Parenterals, Ophthalmics, Vaccines and other pharmaceuticals.
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Multiple layers Polypropylene | |
| Support Layers: | Polypropylene | ||
| Micron Rating: | 0.2, 0.45, 1.0, 3.0, 5.0, 10, 20 um…… | ||
| Inner core: | Polypropylene | ||
| Outer Cage, End caps: | Polypropylene | ||
| Seal Method: | Thermal Bonded, No Adhesives | ||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | ||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | |
| Inner Diameter | 33mm(1.30”) | ||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | ||
| Filtration Area(m2) | 0.60 m2 per 10” | ||
| Operating conditions | Normal Operating Temperature: | Up to 55℃ (131℉) | |
| Max.Operating Temperature.: | 80℃ (172℉) at △P≤1.0 bar (14psi) | ||
| Max. Differential Pressure | |||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | ||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | ||
| PH Value compatibility: | 1-13 | ||
| Sterilization: | Flush with hot water at 82℃(180℉) for 30 minutes, at △P≤1.0 bar (14psi) |
||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | |
| Extractables: | 0.03 g / 10″ | ||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P- PHARMACEUTICAL | RPP | 045-0.45um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 100-1um | CN-226/FIN | 20-20″ | E-epdm; T-teflon (encaptulated) | ||
| E- ELECTRICAL | 500-5um | BN-222/FIN | 30-30″ | V-viton | ||
| G- General | 1000-10um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PRPP045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
We emphasize progress and introduce new merchandise into the market each and every year for Factory Price TS Excellent Flow Rate Multi Layers PP Pleated Filter Cartridge, Be sure to experience free to make contact with us at any time. We’re going to reply you when we receive your inquiries. Please note that samples are available before we start our business.
TS Made Multi Micron PP Pleated Filter, Water Purifier, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
