Factory Price For High Flow Pleated Filter Cartridge - Hydrophilic PTFE Filter Cartridge – Tianshan
Factory Price For High Flow Pleated Filter Cartridge - Hydrophilic PTFE Filter Cartridge – Tianshan Detail:
◆Hydrophilic PTFE membrane suit for liquid sterile filtration, no prewetting
◆High filtration efficiency, ≥99.99%, long service life
◆Uniform pore-size distribution allow high low rate
◆Superior chemical compatibility, ideal for strong alkali and acids, resistant to high temperature, ozone
◆Low extractable levels, no fiber releasing
◆Replace Sartorius ,Pall or Millipore Filter is available
•Mineral water, purified water, ozone, strong oxidizing liquid filtration
•High temperature liquids filtration
•Strong alkali, acids, corrosive liquids filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65,1.0, 3.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H - Chemical | IHPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| P - Phamar | 045-0.45um | BN-222/FIN | 30-30″ | V-viton | ||
| F - Food | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIHPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for Factory Price For High Flow Pleated Filter Cartridge - Hydrophilic PTFE Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Pakistan, Monaco, Bolivia, Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We'll work whole-heartedly to improve our solutions and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By John biddlestone from Japan - 2017.02.28 14:19
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Maxine from Switzerland - 2018.09.23 17:37
Write your message here and send it to us
