Factory Price For High Flow Pleated Filter Cartridge - Glass Fiber (GF) Membrane Pleated Filter Cartridge – Tianshan
Factory Price For High Flow Pleated Filter Cartridge - Glass Fiber (GF) Membrane Pleated Filter Cartridge – Tianshan Detail:
◆High dirt holding capacity and good flow performance
◆Suitable for the retention of colloids, lipids and clarification of liquids
◆Wide chemical compatibility, pH range from 1 to 13, excellent oils resistance
◆Economical for protection of final membrane filters
•Clarification of wine, spirits, fruit juices, soft drinks or other beverages;
•Fine chemicals including reagent, inks and paints;
•Colloids and viscous contaminants removal in pharmaceuticals, as vaccines, culture medias, etc;
•Clarification of cosmetics;
•Kinds of lubricating oil and hydraulic oil clarification;
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Glass Microfiber(GF) | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.2, 0.45, 1.0, 3.0, 5.0um | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.5 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 85℃ (185℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | In-line steam sterilization is Not recommended, Flush with hot water at 82℃(180℉) for 30 minutes |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P- PHARMACEUTICAL | GF | 020-0.20um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20″ | E-epdm; T-teflon (encaptulated) | ||
| G- General | 100-1um | BN-222/FIN | 30-30″ | V-viton | ||
| 300-3um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| 500-5um | CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.50um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PGF050AA10S | |||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
we can easily offer you high-quality products and solutions, competitive rate and very best shopper support. Our destination is "You come here with difficulty and we give you a smile to take away" for Factory Price For High Flow Pleated Filter Cartridge - Glass Fiber (GF) Membrane Pleated Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Bahrain, Borussia Dortmund, Seychelles, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
By Michelle from Swiss - 2018.05.13 17:00
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Jerry from Borussia Dortmund - 2017.09.28 18:29
Write your message here and send it to us
