Factory Outlets Chemical Filter Cartridge
Factory Outlets Chemical Filter Cartridge - Nylon membrane Pleated Filter Cartridge – TianshanDetail:
◆Naturally hydrophilic Nylon 6,6 membrane for sterile filtration, absolute rating ≥99.99%
◆Chemical resistant to alkaline solutions and organic solvents, suitable for sterile filtration of those liquids
◆High low rate and cost-effective High non-specific adsorption and low extractables
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Wine, beer, mineral water, pure water filtration;
•Solvents sterile filtration for analytical determination such as HPLC;
•Fine chemicals, especially ketone, ester, ether,
•Ultrapure water and disk, display, multi silicon process water in Electronics;
•Digital inks
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic Nylon6,6 Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 6-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉), cumulative Time: 3hours, autoclave 30 minutes (optional) | |||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P - Pharmaceutical | PNN | 010-0.1μm | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2μm | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| F - Food&Beverage | 045-0.45μm | BN-222/FIN | 30-30″ | V-viton | ||
| 100-1.00μm | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PPNN045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly forFactory Outlets Chemical Filter Cartridge - Nylon membrane Pleated Filter Cartridge – Tianshan, The product will supply to all over the world, such as: Malaysia, Croatia, New Zealand, We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and solutions and perfect service . We also warmly welcome customers to visit our company and purchase our products.