China factory low price 10 Micron Stainless Steel Pleated Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan Factory and Suppliers

factory low price 10 Micron Stainless Steel Pleated Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan

Short Description:

Product Detail

Product Tags

Feedback (2)

Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for 3m High Flow Filter Cartridge, Bag Filters, Wine Membrane Filter, Welcome throughout the world buyers to speak to us for organization and long-term cooperation. We're going to be your reliable partner and supplier.

factory low price 10 Micron Stainless Steel Pleated Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan Detail:

◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)

• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration

Table : Typical water flow rate (10″)

vwqebsdwdbe

Materials Of Construction	Filter Media:	Melt Blown Polypropylene
	Micron Rating:	1.0, 5.0, 10.0, 20, 50, 70, 100um
	Inner core:	Polypropylene or Coreless
	O-rings/gaskets(Only for 226, 222 Ends):	Silicone, Nitrile, EPDM, Viton, etc
	Filtration Efficiency	≥80%
Cartridge Dimensions	Outer Diameter	63mm (2.5″) / 114mm (4.5″)
	Inner Diameter	28mm (1.10″)
	Length(based on DOE end caps)	10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm
	Filtration Area(m2)	0.4 m2 per 10”
Operating conditions	Normal Operating Temperature:	Up to 50℃ (122℉)
	Max.Operating Temperature.:	80℃ (176℉) at △P≤1.0 bar (14psi)
	Max. Differential Pressure
	Normal Flow direction:	4.0 bar (58psi) at 25℃ (77℉)
	Reverse flow direction:	2.0 bar (29psi) at 25℃ (77℉).
	PH Value compatibility:	1-13
	Sterilization:	Not recommended

PRODUCT	MICRON	Outer DIA.	ADAPTER	LENGTH	O-RING / GASKET
CP	100-1um	D63-63mm(2.5″)	AA- CUT ENDS (NIL)	10-10″	S-silicone; N-nitrile
	500-5um	D114-114mm(4.5″)	BN-222/ FIN	20-20″	E-epdm ; V- viton
	1000-10um		CN-226/ FIN	30-30″
	2000-20um			40-40″	How to Order?- Example
				Other-XX	Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″
					Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″
					Selection Code is: CP100D63AA10
					Selection Code is: CP100D63AA10

Product detail pictures:

Related Product Guide:

To create far more benefit for customers is our company philosophy; customer growing is our working chase for factory low price 10 Micron Stainless Steel Pleated Filter Cartridge - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Latvia, Johannesburg, The Swiss, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

0.22 µm Air Filter