Factory Directly supply Industrial Replacement Pleated PP Filter Cartridge for Water Treatment
The business keeps to the operation concept “scientific management, premium quality and efficiency primacy, customer supreme for Factory Directly supply Industrial Replacement Pleated PP Filter Cartridge for Water Treatment, We warmly welcome buddies from all walks of everyday living to hunt mutual cooperation and build a more brilliant and splendid tomorrow.
The business keeps to the operation concept “scientific management, premium quality and efficiency primacy, customer supreme for Customized TS brand PP membrane pleated filter cartridge, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
◆ Graded density ultra fine polypropylene membrane filter, could provide absolute rating
◆ Pleated depth media for high flow rate and maximum dirt holding capacity
◆ 100% polypropylene construction offers broad chemical compatibility
◆ High retention efficiency provide excellent protection of downstream filters
◆ No fiber migration into the process fluid
◆ Replace Sartorius ,Pall or Millipore Filter is available
•Pharmaceuticals; APIs; Biologics; Opthalmics;
•Plating solutions; Ink;
•Fine Chemicals, Photoresists, Acids, Bases, Solvents
•Semi-Conductor, LCD Display; Discs.
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Polypropylene | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (172℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours; |
|||||
| Flush with hot water at 82℃(180℉) for 30 minutes, at △P≤1.0 bar (14psi) – Recommended. |
||||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H-CHEMICAL | IPP | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E- ELECTRICAL | 020-0.20um | CN-226/FIN | 20-20″ | E-epdm; T-teflon (encaptulated) | ||
| P-PHARMACEUTICAL | 045-0.45um | BN-222/FIN | 30-30″ | V-viton | ||
| F- FOOD & BEVERAGE | 100-1.00um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.5um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPP050AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
The business keeps to the operation concept “scientific management, premium quality and efficiency primacy, customer supreme for Factory Directly supply Industrial Replacement Pleated PP Filter Cartridge for Water Treatment, We warmly welcome buddies from all walks of everyday living to hunt mutual cooperation and build a more brilliant and splendid tomorrow.
Factory Directly supply Customized TS brand PP membrane pleated filter cartridge, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
