Factory Directly supply China Hydrophilic PTFE Filter Element
We have probably the most state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for Factory Directly supply China Hydrophilic PTFE Filter Element, For additional info, you should send out email to us. We’re looking forwards the opportunity to service you.
We have probably the most state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for China Hydrophilic PTFE Filter Element, Fold Polytetrafluoroethylene Membrane Filter Element, For anyone who is keen on any of our merchandise right after you view our product list, be sure to really feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it’s easy, you may locate out our address in our web-site and come to our business for far more information of our merchandise by your self. We are always ready to construct extended and steady co-operation relations with any possible customers in the related fields.
◆Hydrophilic PTFE membrane suit for liquid sterile filtration, no prewetting
◆High filtration efficiency, ≥99.99%, long service life
◆Uniform pore-size distribution allow high low rate
◆Superior chemical compatibility, ideal for strong alkali and acids, resistant to high temperature, ozone
◆Low extractable levels, no fiber releasing
◆Replace Sartorius ,Pall or Millipore Filter is available
•Mineral water, purified water, ozone, strong oxidizing liquid filtration
•High temperature liquids filtration
•Strong alkali, acids, corrosive liquids filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65,1.0, 3.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) | |||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H - Chemical | IHPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| P - Phamar | 045-0.45um | BN-222/FIN | 30-30″ | V-viton | ||
| F - Food | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIHPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
We have probably the most state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for Factory Directly supply China Hydrophilic PTFE Filter Element, For additional info, you should send out email to us. We’re looking forwards the opportunity to service you.
Factory Directly supply China Hydrophilic PTFE Filter Element,Fold PolytetrafluoroethyleneMembrane Filter Element, For anyone who is keen on any of our merchandise right after you view our product list, be sure to really feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it’s easy, you may locate out our address in our web-site and come to our business for far more information of our merchandise by your self. We are always ready to construct extended and steady co-operation relations with any possible customers in the related fields.