Factory directly Pes Filter Cartridges For Pharma - High Flow Melt Blown Filter Cartridge – Tianshan
Factory directly Pes Filter Cartridges For Pharma - High Flow Melt Blown Filter Cartridge – Tianshan Detail:
◆100% high purity polypropylene (melt blown), thermally bonded on a polypropylene centre core, no adhesives
◆High dirt holding capacity and low pressure loss
◆Many connections (DOE, 226 ,222 End caps) are available
◆Wide chemical compatibility, various micron ratings (1um to 100um)
◆One piece construction up to 1524mm (60”)
• Prefiltration in process water treatment industry;
• Clarification for waste water treatment;
• Bottled water, wine, beer pre-fltration in food& beverage industry
• Prefiltration before RO system in electronics process water,
• Organic solvents, inks, plating solution, metal cutting luids, photoresist filtration
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Melt Blown Polypropylene | ||||
| Micron Rating: | 1.0, 5.0, 10.0, 20, 50, 70, 100um | |||||
| Inner core: | Polypropylene or Coreless | |||||
| O-rings/gaskets(Only for 226, 222 Ends): | Silicone, Nitrile, EPDM, Viton, etc | |||||
| Filtration Efficiency | ≥80% | |||||
| Cartridge Dimensions | Outer Diameter | 63mm (2.5″) / 114mm (4.5″) | ||||
| Inner Diameter | 28mm (1.10″) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.4 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 50℃ (122℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.0 bar (58psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.0 bar (29psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Not recommended | |||||
| PRODUCT | MICRON | Outer DIA. | ADAPTER | LENGTH | O-RING / GASKET | |
| CP | 100-1um | D63-63mm(2.5″) | AA- CUT ENDS (NIL) | 10-10″ | S-silicone; N-nitrile | |
| 500-5um | D114-114mm(4.5″) | BN-222/ FIN | 20-20″ | E-epdm ; V- viton | ||
| 1000-10um | CN-226/ FIN | 30-30″ | ||||
| 2000-20um | 40-40″ | How to Order?- Example | ||||
| Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10″ | |||||
| Selection Code is: CP100D63AA10 | ||||||
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory directly Pes Filter Cartridges For Pharma - High Flow Melt Blown Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Curacao, Venezuela, Algeria, we are sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.
By Fiona from Surabaya - 2018.06.05 13:10
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Lindsay from Cape Town - 2018.09.16 11:31
Write your message here and send it to us
