Europe style for Air Filter Element - Single Layered PP Pleated Filter Cartridge – Tianshan
Europe style for Air Filter Element - Single Layered PP Pleated Filter Cartridge – Tianshan Detail:
◆ Graded density ultra fine polypropylene membrane filter, could provide absolute rating
◆ Pleated depth media for high flow rate and maximum dirt holding capacity
◆ 100% polypropylene construction offers broad chemical compatibility
◆ High retention efficiency provide excellent protection of downstream filters
◆ No fiber migration into the process fluid
◆ Replace Sartorius ,Pall or Millipore Filter is available
•Pharmaceuticals; APIs; Biologics; Opthalmics;
•Plating solutions; Ink;
•Fine Chemicals, Photoresists, Acids, Bases, Solvents
•Semi-Conductor, LCD Display; Discs.
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Polypropylene | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (172℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours; |
|||||
| Flush with hot water at 82℃(180℉) for 30 minutes, at △P≤1.0 bar (14psi) – Recommended. |
||||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| H-CHEMICAL | IPP | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E- ELECTRICAL | 020-0.20um | CN-226/FIN | 20-20″ | E-epdm; T-teflon (encaptulated) | ||
| P-PHARMACEUTICAL | 045-0.45um | BN-222/FIN | 30-30″ | V-viton | ||
| F- FOOD & BEVERAGE | 100-1.00um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.5um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPP050AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Europe style for Air Filter Element - Single Layered PP Pleated Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Sao Paulo, Malta, Oslo, Each product is carefully made, it will make you satisfied. Our merchandise in the production process have got strictly monitored, because it is only to supply you the best quality, we'll feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Jean Ascher from Buenos Aires - 2018.11.06 10:04
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Heloise from Leicester - 2018.06.26 19:27
Write your message here and send it to us
