Competitive Price for TS 10 Inch Nylon 66 Membrane Pleated Filter Cartridge Micron Filtration Water Filter 0.45 Microns
To frequently enhance the management process by virtue of your rule of “sincerely, good religion and good quality are the base of company development”, we greatly absorb the essence of associated solutions internationally, and regularly produce new goods to meet the needs of shoppers for Competitive Price for TS 10 Inch Nylon 66 Membrane Pleated Filter Cartridge Micron Filtration Water Filter 0.45 Microns, We’re going to endeavor to maintain our great status as the ideal products and solutions supplier while in the world. For those who have any questions or responses, please contact with us freely.
To frequently enhance the management process by virtue of your rule of “sincerely, good religion and good quality are the base of company development”, we greatly absorb the essence of associated solutions internationally, and regularly produce new goods to meet the needs of shoppers for TS brand nylon filter cartridge, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
◆Naturally hydrophilic Nylon 6,6 membrane for sterile filtration, absolute rating ≥99.99%
◆Chemical resistant to alkaline solutions and organic solvents, suitable for sterile filtration of those liquids
◆High low rate and cost-effective High non-specific adsorption and low extractables
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Wine, beer, mineral water, pure water filtration;
•Solvents sterile filtration for analytical determination such as HPLC;
•Fine chemicals, especially ketone, ester, ether,
•Ultrapure water and disk, display, multi silicon process water in Electronics;
•Digital inks
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic Nylon6,6 Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 6-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉), cumulative Time: 3hours, autoclave 30 minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | <0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P - Pharmaceutical | PNN | 010-0.1μm | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2μm | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| F - Food&Beverage | 045-0.45μm | BN-222/FIN | 30-30″ | V-viton | ||
| 100-1.00μm | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PPNN045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||







