China Factory for Air Purifier Filter Element - Hydrophobic PTFE Filter Cartridge – Tianshan
China Factory for Air Purifier Filter Element - Hydrophobic PTFE Filter Cartridge – Tianshan Detail:
◆Naturally hydrophobic PTFE membrane with excellent porosity, high low rate
◆Absolute rating, filtration efficiency ≥99.99%, Up to 0.01 micron in gas sterile
◆Low pressure drop and long service life
◆Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
◆High temperature endurance performance
◆100% integrity tested before final assembly
◆Replace Sartorius ,Pall or Millipore Filter is available
•Compressed air, CO2 line sterile filtration;
•Tank vent, Fermentation air,
•Air filtration in aseptic packaging.
•Aggressive acids, Bases, Solvents;
•Photoresists, Etch Solutions;
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | IPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| 045-0.45um | BN-222/FIN | 30-30″ | V-viton | |||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for China Factory for Air Purifier Filter Element - Hydrophobic PTFE Filter Cartridge – Tianshan , The product will supply to all over the world, such as: Portugal, Argentina, New York, As a well educated, innovative and energetic staff,we are responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we are not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and provide instant communication. You will instantly feel our expertise and attentive service.
By Ruth from Doha - 2017.05.02 11:33
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Karen from Australia - 2018.10.31 10:02
Write your message here and send it to us
