Tlhahiso e ncha ea Cartridge ea Flow PP ea Flower PP
Tlhahiso e ncha ea Cartridge ea Flow PP ea Flow PP ea Flower PP Setopo sa Carbon block Cartridge - Tianshandtail:
◆ boemo bo botle ba papatso, likaroloana tse phahameng li tlosoa
◆ Phokotso ea Clorine ea Clorine le eamer ea monko;
◆ Bophelo bo botle ba tšebeletso e telele;
• Pele - Pele - Pele - kalafo ho lits'ebetso tsa ROS;
• chlorine le ho tlosa monko;
• Phokotso ea Clolor.
Tafole: Litefiso tse tloaelehileng tsa metsi (10 ")
| Lisebelisoa tsa kaho | Media Media: | Tloaelehileng khabin / coconut shell carbon | |||
| Tekanyetso ea Micer: | 5.0 um | ||||
| KOTSI EA ARICA: | Polypropiplene | ||||
| Ka ntle: | Polypropiplene | ||||
| Li-cap tsa pheletso: | Polypropingne | ||||
| O - li-mehele / li-garike: | Silicone | ||||
| Ts'ebetso ea ho tlosoa: | ≥90% | ||||
| Litekanyo tsa Cartridge | Bophara ba kantle | 65mm (2.5 ") | |||
| Bophara ba kahare | 28mm (1.1 ") | ||||
| Bolelele (ho ipapisitse le li-caps tsa Doe Four) | 10 "- 254mm, 20 "- 508mm | ||||
| Sebaka sa FilTration (M2) | 0.4 m2 m2 ka 10 " | ||||
| Maemo a Sebetsa | Mocheso o tloaelehileng o sebetsang: | Ho fihla ho 55 ℃ (140 ℉) | |||
| Max. Khatello e fapaneng | |||||
| Tataiso e tloaelehileng ea phallo: | 4.0 Bar (58 psi) ho 25 ℃ (77 ℉) | ||||
| Sebaka sa ho phela: | 2.0 Bar (29 PSI) Kwa 25 ℃ (77 ℉). | ||||
| Sehlahisoa | Micron | ADAPTERTTER | Lintho tse bonahalang | Bolelele | O - R ring / Gasket |
| Cto | 500 - 5um | AA - Doe | A - carbon e tloaelehileng | 10 - 10 " | S - Silicone; N - nitrile |
| B - Coconut Shell Carbon | 20 - 20 " | E - EPDM; | |||
| Mokhoa oa ho odara? - Mohlala | |||||
| Micron: 5um; Bolelele: 10 "ADAPET: DEE; Gakset: silicone. Khoutu ea khetho ke: Cto500AAKS | |||||
Litšoantšo tsa Tlhahiso:
Tataiso e amanang le sehlahisoa:
The Corporate e lula e lebisang mohopolo oa boqapi " Khabareng, ho ikemiselitse ho nts'etsapele sehlopheng sa khoebo sa machabeng, re lebelletse ho amohela litokisetso tsa methapo e kopaneng le merero e meng ea tšebelisano.