Epsule lim tau zoo ntawm tus kheej muaj, npaj siv, lim dej
◆ Ua tau los ntawm polypropylene tawb thiab pleated membrane lim sab hauv los ntawm rmal bonding, dawb ntawm cov nplaum, binders thiab lwm yam tshuaj
◆ Muaj muaj ntau txoj kev sib txuas thiab lim metolias rau kev xaiv kom tau raws li cov kev xav tau ntawm lub txim
◆ Qhov zoo tshaj plaws rau cov khoom lag luam me me uas tau ua tiav thiab cov kua dej kawg lossis cov roj hauv kev kuaj
◆ Kev nthuav tawm siab ncaj ncees ua ntej tso cov khoom lag luam
• Digital Inks, tha xim
• Kev txhaj tshuaj me me thiab ntaub so ntswg hauv kev lag luam kev lag luam
• Corrosive kua / cov kuab tshuaj lim hauv kev lag luam chemical
• Photoresist, acids, thiab lwm yam hauv kev lag luam hluav taws xob
• Roj / Lub Chaw Ua Si
• Kuaj cov kev daws teeb meem
| Rooj: Lim tawm thiab Pore loj muaj | ||
| Lim | TS CODER | Pore loj (um) |
| Tus mov | Tus ips | 0.10, 0.20, 0.45, 0.65 μm |
| PP | Tus ntses dpp | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 μm |
| Ptfe | Ntawv ipf | 0.10, 0.20, 0.45, 1.00 μm |
| Nylon66 | Naj npawb | 0.10, 0.20, 0.45, 0.00 μm |
| PVDF (Hydrophilic) | Khapv | 0.10, 0.20, 0.45, 1.00 μm |
| Cov ntaub ntawv siv | Lim media: | Pp / pes / pvdf / ptfe / nylon thiab lwm yam weepbranes rau cov kev xaiv | ||||
| Txhawb Txheej: | Polyprropylene | |||||
| Hauv tub ntxhais hluas: | Polyprropylene | |||||
| Sab nraud tawb, xaus lub kaus mom: | Polyprropylene | |||||
| Cartridge qhov ntev | Txheej hauv lub taub | 69 hli / 60mm | ||||
| Qho ntev | Nominal 1.5 ", 2.5", 5 "10" | |||||
| Connectors: | Mnpt; Hose Barb; Huv npluav Flange (Tri - Clamp); Kev sib koom tes hluavtaws thiab lwm yam | |||||
| Pom thaj tsam (M2) | 0.045 m2 rau 0.44 m2 | |||||
| Kev khiav hauj lwm | Kev ua haujlwm ib txwm kub: | Txog li 60 ℃ (140 ℉) | ||||
| Max.operating kub.: | 80 ℃ (176 ℉) ntawm △ C≤1.0 bar (14psi) | |||||
| Max. Mos siab | 2.4 bar (34.8.8psi) ntawm 25 ℃ (77 ℉). | |||||
| Kev Taug Kev Ntws: | 4.2 bar (60 psi) ntawm 25 ℃ (77 ℉) | |||||
| Rov qab Flow kev taw qhia: | 2.1 bar (30psi) ntawm 25 ℃ (77 ℉). | |||||
| Kom tsis muaj menyuam: | Autoclave kom tsis muaj menyuam 30 feeb, Gamma - irradiation (yuav tsum tau lees tias tus muag khoom) | |||||
| Ntaus | Lim | Micron | Kev sib txuas | Qho ntev | Qhov rai / ntws | |
| K68B - φ68 (Cheeb Tsam Pom Hauv 1200CF2 lossis 2200CM2 lossis 4400CM2 rau kev xaiv) | IPS - Polyethersulfone | 0.1um - 010 | A - 1 1/2 "Tri - Clamp (K68C Hom nkaus xwb) | 1 - 1.5 "(k60 xwb) | M10 (K68B & K60) | |
| K60 - om60 (filtraion cheeb tsam 450cm2) | IPP - Polypropylene | 0.2um - 020 | B - 1/2 "Tri - Clamp (K68C Hom nkaus xwb) | - 2.5 "(K68B & K68C) | 1/8 "hose barb (K68C nkaus xwb) | |
| K68C - Φ68 (Cheeb Tsam Pom: 1200 CM2 lossis 2200CM2 lossis 4400CM2 rau kev xaiv) | IPF - Polytetrafluoroethylene | 0.45um - 045 | C - 1/4 "mnpt (K68b & K60 xwb) | - - 5 "(K68B & K68C) | ||
| Pnn - nylon | 0.65um - 065 | D - 1/2 "mnpt (K68B nkaus xwb) | 10 - 10 "(K68B & K68C) | |||
| DHPV - polyvinylidenefruoride | 1um - 100 | E - 9/16 "Hose Barb (K68B Tsuas) | ||||
| Cnca | 5um - 500 | F - 1/4 "compression sib koom tes (K60 xwb) | ||||
| 10um - 1000 | G - 1/4 "Hose Barb (K68B & K60) | |||||
| 50um - 5000 | H - 1/2 "Hose Barb (K68B Tsuas) | |||||
| X - Lwm tus (yog tias koj xav tau lwm yam txuas pls ua kev nug) | ||||||
| Piv txwv: Pes membrane, 0.200CM2 thaj chaw pom tseeb, 1.5 "clamp -k68cips020A5 | ||||||
Npe: K60 - 2C - M10
Inlet & Outlet: 1/4 "Kev sib koom tes cable:
Pom thaj tsam: 450cm²
Npe: K68B - 4H - M10 2.5 "
Inlet & Outlet: 1/2 "Hose Barb
Pom thaj tsam: 1200cm²
Npe: K68C - TC - 1h 5 "
Inlet & Qhov Ncauj Lus: 1.5 "Huv Huv Flange Connector
Pom thaj tsam: 2200cm²
Npe: K68B - 2n - M10 2.5 "
Inlet & Outlet: 1/4 "NPT Txuas
Pom thaj tsam: 1200cm²
Lub Npe: K68C - MT - 1h 2.5 "
Inlet & Outlet: 1/2 "Huv Huv Flange Connector
Pom thaj tsam: 1200cm²
Lub Npe: K68C - TC - 1h 2.5 "
Inlet & Qhov Ncauj Lus: 1.5 "Huv Huv Flange Connector
Pom thaj tsam: 1200cm²
